BL-3G Stabilization Products now in stock

Both BL-3GRC and BL-3GMod now in stock. BL-3G now supports hex copters. See our flight test video page at:

Low cost, good quality hex-copter solutions can now be made for around $500 for DIY RC / aerial photography enthusiasts:

$49 > ICE-MAN Controller  and Gyro (from
$120 > 6 x brushless motors (1000 Kv)
$120 > 6 x ESC units (30A)
$160 > Frame with 25cm arms and landing legs (from
$60 > 1 x LiPo battery (3 cell, 11.1v, 2250 mAH, 65C)
$10 > 6 x Props, 10/6 inch 2 or 3 blade props

So around US$520, or if you include the RC and camera equipment:

$200 > Futaba low cost RC Tx / Rx (T6EX)
$80 > GoPro camera mount (from
$280> GoPro Hero 2 camera

An additional $560 or thereabouts. This gives you a basic stable hex-copter with “wet” weight of around 1.9 Kg and flight time around 15 to 20 mins. Ready to go for all sorts of aerial shots. The controller can then be upgraded for a full loiter / GPS  / FPV / AHRS etc. system later on.

Check out our BL-3GRC and BL-3GMod at
Or to see the above actually flying.

aircraft controller, aviation, BL-3G, drone, gyro, L3GD20, STMicroelectronics, technology
This entry was posted in Products and tagged , , , , , , , , , , , , , , , . Bookmark the permalink.

1 Response to BL-3G Stabilization Products now in stock

  1. Source says:

    My brother suggested I might like this web site.
    He was totally right. This post actually made my day.
    You cann’t imagine just how much time I had spent for this information! Thanks!

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s